|
|
Tripp-Lite SmartPro 1500VA Rackmount 2U UPS, Refurbished (SMART1500RM2U)
|
Out of stock
Manufacturer: Tripplite
Manufacturer Part No: SMART1500RM2U
|
This is a refurbished Uninterruptible Power Supply/Battery Backup unit. It has been installed with brand new, high quality batteries, and has been thoroughly tested and then professionally packed in a brand new box. All products sold by UPSforLESS are fully covered for all parts and labor by our famous One-Year "No-Hassle" warranty and our innovative 30-Day "Lemon" warranty.
OUTPUT
- Output Volt Amp Capacity (VA) 1500 (1000 Watts)
- Output voltage regulation (line mode) -21%, +8%
- Output voltage regulation (Battery mode) +/- 5%
- Built-in UPS output receptacles 8 5-15R outlet(s) (Standard 3-prong outlets)
- Output AC waveform Sine wave
INPUT
- Nominal Input Voltage(s) Supported 120V AC
- UPS input connection type 5-15P (Standard 3-prong plug)
- UPS Input cord length (ft.) 10
- Recommended Electrical Service 15A 120V
BATTERY
- Full load runtime (minutes) 7 min. (1000w)
- Half load runtime (minutes) 19 min. (500w)
- Battery recharge rate (included batteries) Less than 4.5 hours from 10% to 90%
- Battery Access Front panel battery access door
- Battery replacement description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
- Voltage regulation description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
- Overvoltage correction Input voltages between 128 and 147 are reduced by 12%
- Undervoltage correction Input voltages between 83 and 107 are boosted by 14%
LEDS ALARMS & SWITCHES
- LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
- Alarms Audible alarm indicates power-failure, overload and low-battery conditions
- Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
SURGE / NOISE SUPPRESSION
- UPS AC suppression joule rating 480
- UPS AC suppression response time Instantaneous
- EMI / RFI AC noise suppression Yes
PHYSICAL
- UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 3.5 x 17.5 x 13.5 (8.9cm x 44.4cm x 34.3cm)
- Secondary form factor Tower (requires 2-9USTAND)
- UPS / Power Module weight (lbs) 46 (20.9 Kg.)
ENVIRONMENTAL
- Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- AC mode BTU / hr. (full load) 105.2
- Battery mode BTU / hr. (full load) 600
COMMUNICATIONS
- Communications interface USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
- Network monitoring port description Supports detailed monitoring of UPS and site power conditions
LINE / BATTERY TRANSFER
- Transfer time 2-4 milliseconds
- Low voltage transfer to battery power (setpoint) 83
- High voltage transfer to battery power (setpoint) 147
SPECIAL FEATURES
- Cold Start (startup in battery mode during a power failure) Cold-start operation supported
- High availability UPS features Hot swappable batteries
- Green & high efficiency features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
- UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI); ROHS (Reduction of Hazardous Substances)
|
|


| Frequently Asked Questions and links to company policies and procedures. Please don't hesitate to contact us at (866) 577-3628 if you have a question that couldn't be answered in these pages.
|
| Manufacturer specific UPS sizing and selection tools.
Once you have determined the correct size and type of UPS, please look through our stock to see if we have anything that is similar to the recommendation. |
|
|