Powercom Ultimate 15KVA Double Conversion Online Tower Single Phase UPS NEW (ULT-15K)

---

This UPS is brand new. One year warranty coverage is offered directly by the manufacturer. Since warranty coverage is provided directly from Powercom, this unit is not covered by the UPSforLESS "lemon" warranty.

This true online, pure sine wave, double-conversion UPS is suitable for high availability situations and mission critical equirements. It offers a front panel LCD for easy configuration and also has the capability of extending the runtime with the addition of an external battery pack. CAPACITY

• 15,000 VA (15KVA)
• 10,500 Watts

PLUGS & CONNECTIONS

This is a “hard-wired” UPS. This means that the UPS is not pre-installed with any standard plugs or outlets. Instead, the UPS is equipped with a terminal block. A qualified electrician will be required to install an appropriate circuit to provide power to the UPS and also create the necessary connections from the UPS to the equipment needing to be protected.

DELIVERY

This is a large UPS and weighs 570 lbs (260Kg). It is delivered on its own pallet/skid. Please advise us at the time of ordering if you have a truck level dock where this unit can be directly unloaded or whether you will require a truck with a lift gate. This may impact delivery charges. Additionally, you will also need appropriate moving/material handling equipment such as dollies or a strong cart to transport this unit from its receiving point to its intended destination within your facility or building. Since this unit is delivered by truck, please disregard the standard freight charges quoted to you by our shopping cart. We will confirm actual freight costs to you once you advise us about the availability of a truck level dock.

AC INPUT

• Voltage 208-240V Single Phase
• Current 80 Amps Max
• Frequency 50 or 60 Hz+/-3 Hz
• Power factor >= 0.95

AC OUTPUT

• Voltage 120V/208V/220V/230V/240V +/- 2%
• Current 72Amps Max.
• Frequency 50Hz/60Hz (Auto detection)
• Frequency Stability (+/-0.5%)
• Voltage Regulation (+/-2%)
• Powerfactor 0.7 (lagging)
• Hamonic distortion <5% of T.H.D. at linear load
• Overload detection 105% for 10 seconds and 130% +/- 10% for 300ms

TRANSFER

• Transfer Power failure Recovery 0 ms
• Transfer UPS to By Pass or Vice Versa 0 ms

NOISE

• Noise Level 1m Distance < 45dBA

PROTECTION

• Protection Spike 450 Joules

BATTERY

• Battery Type Sealed lead acid battery, free-maintenance
• Battery DC Voltage 240V

BACKUP TIME

• Battery Backup Time Full Load 8 minutes
• Battery Backup Time Half Load 22 minutes
• Battery Recharge Time About 8 hours to 90% after fully discharged

PHYSICAL

• Weight: 743lb (338 Kg)
• Dimensions: 13.6"w x 30.4"l x 46.4"h (340mm x 760mm x 1160mm)

INDICATORS

LCD Status Indicators show:
• Line/Bypass/Inverter/Backup/Fault
• Battery capacity
• Load capacity
• Input frequency
• Output voltage
• Output frequency
• Inside temperature
• Fault status

ALARM

• Battery Discharge: The first warning will beep every 4 seconds to indicate battery in use. When battery is close to empty, the second warning will beep every 1 second to signal battery low condition
• UPS Fault: Continuous beeping sound

INTERFACE

UPSMON on-line monitoring software included.

• Dry Contact: Sends AC fail and battery low signals, and receives shutdown signal from computer
• RS-232 Detect battery low, Schedule UPS on/off, AC input/output power status display
• O/S Options: Novell, SNMP, Windows NT, Window 95/98/2000/ME/XP