Liebert UpStation 1500VA Double-Conversion Online Tower/Rackmount 2U UPS Refurbished (GXT2-1500RT-120B)

---

The GXT2 takes the outstanding features and unmatched reliability of the UPStation GXT series and puts it into a smaller 2U cabinet. A true on-line UPS, GXT2 includes power factor correction, frequency conversion, unlimited external battery connectability, and internal automatic / manual bypass capability. For maximum flexibility, the GXT2 can be installed as a space-saving rack-mounted unit or a space-saving, free standing tower.

Features:

• True On Line (Double Conversion) Technology
• User replaceable batteries without removing GXT2 from rack
• Compatible with Intellislot OCWEBCARD Card
• Compatible with RELAYCARD-INT (relay contacts)
• Compatible with USBCARD

Input

• 0 - 140 VAC, 60/50 Hz, single-phase, 2-wire-plus-ground.

Output

• 120 V Units: 120 VAC (user configurable: 100V, 110V, 115V, 120V, 127V) +3%, 60/50 Hz, single-phase, 2-wire-plus-ground.
• Output Power 1500 VA/1000 Watts at 0.7 lagging power factor.
• Receptacles (4) NEMA 5-15R (standard 3-prong 15A receptacles)

Battery

• Battery Recharge: The UPS contains a battery recharge rate designed to prolong battery life. Recharge time for UPS internal batteries is five (5) hours maximum to 95% capacity after a complete discharge into full load.

Surge Protection

• Electrostatic Discharge: The UPS is able to withstand an electrostatic discharge compliant to ENC61000-4-2, level 4, for 120 VAC, 208 VAC, and 230 VAC units (15 kV through air, 8 kV contact) without damage and will not affect the connected load
• MOVs will be rated 300 Volt, 150 Joules minimum connected L-G and N-G.

Environmental

• Ambient Temperature Operating: 0O C to +40O C (+ 32O F to + 104O F) for altitudes 0 to 1500 meters (0 to 5,000 ft.) above sea level.
• Audible Noise generated by the UPS under normal operation does not exceed 50dBA when measured at 1 meter from the surface of the UPS.

Physical

• Height 3.47”
• Depth 21.75”
• Width 16.9”
• Weight 49.4lbs. (22.4kg)

System Indicators

• The "Fault" LED indicator illuminates red to indicate a UPS fault condition.
• The "Battery" LED indicator illuminates amber to indicate the UPS is operating from battery power.
• The "Bypass" LED indicator illuminates amber to indicate the UPS is operating on Bypass power.
• An audible alarm is provided and activated by any of the above alarm conditions.
• The "UPS ON" LED indicator illuminates green to indicate the UPS inverter is operating and supplying power.
• The "AC Input" LED indicator illuminates green to indicate the UPS is operating from utility / mains power.

Communications

• The UPS contains a DB9F (9 pin female) connector on the rear panel to allow UPS status communications to a computer system. The DB9F contains photo couplers to signal on battery and low battery operational status.