Features
- 2200VA line interactive tower UPS system for 120V network and telecommunications systems
- Corrects brownouts and overvoltages from 87-140V
- Expandable with multiple BP24V33 external battery packs
Description
Tripp Lite's SMART 2200NET intelligent, line interactive large tower UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 27 minutes half load runtime and 11 minutes fully loaded. Runtime is expandable with optional BP24V33 external battery packs. 2200VA / 1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic applications. Includes 6 protected outlets. Supports remote monitoring of UPS and site power conditions via built-in RS-232 enabled monitoring port, plus standard UPS monitoring via 2 built in contact closure ports. PowerAlert UPS monitoring and unattended shutdown software is available from TrippLite. Supports SNMP with optional external SNMPWEBSOLO adapter. Built-in audible alarm and front panel LEDs indicate line power, battery power, battery charge level, load level, plus voltage regulation status. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges.
Typical Applications
Ideal for the protection of communication equipment including: routers, hubs, switches, IP-PBX, Traditional PBX and Key/Hybrid Telephone Systems. Also ideal for the protection of data processing equipment such as fileservers, workstations and other sensitive devices requiring clean, continuously regulated output power. Extended runtimes are available using additional external battery packs (BP24V33).
Specifications
Output
- Output volt amp capacity (VA): 2200
- Output watt capacity (watts): 1700
- Output nominal voltage: 120V AC
- Output voltage in battery mode: Sine wave output 120V +/-5%
- Outlet quantity / type: 6 NEMA 5-15R
- Overload protection: Via 20A input breaker
Input
- Maximum input amps: 15A, 1770 watts
- Input connection type: NEMA 5-15P
- Recommended electrical service: 20A 120V
Battery
- Full load runtime: 11 minutes (2200VA)
- Half load runtime: 27 minutes (1100VA)
- Expandable battery runtime: Supports extended runtime with optional BP24V33 external battery pack (multi-pack compatible).
- Battery recharge rate: 2-4 hours to 90%
Voltage Regulation
- Voltage regulation description: Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power.
- Overvoltage correction: Input voltages between 127 and 140V AC are reduced by 12%
- Direct pass through: Input voltages between 110 and 127V AC are passed through unchanged
- Brownout correction: Input voltages between 95 and 105V AC are boosted by 10%
- Severe brownout correction: Input voltages between 87 and 94V AC are boosted by 22%
Alarms
- Front panel LEDs: Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information
- Alarms: Audible alarm with 15 second delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front panel alarm cancel button. Once silenced, alarm will re-sound when approximately 2 minutes runtime remain.
Surge Management
- AC surge suppression: 480 joules
- AC suppression response time: Instantaneous
- EMI / RFI AC noise suppression: Yes
Physical
- Shipping weight (lbs): 87
- Unit Dimensions (HWD/in): 17 x 9 x 12.5
Environmental
- Line mode BTU/hr. (Max.): 148.2
- Battery mode BTU/hr. (Max.): 502.6
Communications
- Network monitoring port: Includes 3 built-in DB9 monitoring ports, 1 enabled with RS-232 data communications and 2 with standard contact closure communications. All interfaces support on battery, low battery and power restored messaging. RS-232 enabled port adds data regarding AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Supports individual reboot of selected items connected to load management receptacles and load shedding to increase battery runtime for the most critical loads.
- SNMP compatibility: Yes via external SNMP adapter accessory #SNMPWEBSOLO
|
