Features
- Built-in voltage regulation and battery support, plus complete AC suppression prevents equipment damage, data loss and downtime
- Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an input voltage range of 75-147V
- Includes a total of 6 NEMA5-15R outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment or shed less significant loads to extend battery runtime for more critical equipment
- Includes 1 USB and 1 DB9 monitoring port for remote monitoring of UPS status and site power conditions
- Communications ports enable safe unattended shutdown without data loss during extended power failures
- Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery voltage and battery capacity
- Notification of system status via 5 LEDs and multi-function audible alarms
- Hot-swappable / user replaceable batteries allow on-site battery replacement
- Cold start capability enables UPS turn-on in battery mode during blackout conditions
OUTPUT
- Output volt amp capacity (VA): 1500 / 980 Watts
- Wavevform True Sine Wave
Outlets 6 NEMA 5-15R (Standard 3-prong receptacles)
INPUT
- Input connection NEMA 5-15P (Standard 3-prong plug)
BATTERY
- Estimated Runtime at Full load (980 Watts) 7 minutes
- Estimated Runtime at Half load (490 Watts) 20 minutes
- Battery recharge rate: 2-4 hours to 90%
- Battery Access: Battery access door allows hot swap battery replacement without powering connected equipment off
VOLTAGE REGULATION
- Voltage regulation description: Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 75V and overvoltages to 147V
- Overvoltage correction: Input voltages between 128 and 147V AC are reduced by 12%
- Direct pass through: Input voltages between 108 and 127V AC are passed on to connected equipment unchanged
- Brownout correction: Input voltages between 93 and 107V AC are boosted by 14%
Severe brownout correction: Input voltages between 75 and 92V AC are boosted by 30%
LEDS ALARMS & SWITCHES
- Front panel LEDs: Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information
- Alarms: Audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone)
- Switches: Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
SURGE / NOISE SUPPRESSION
- AC surge suppression: 480 joules
- AC suppression response time: Instantaneous
PHYSICAL
- Weight 42.6 lbs. (19.4 kg)
- Dimensions (HWD/in): 12.75 x 7.5 x 9 (32.4 x 19.1 x 22.9 cm)
COMMUNICATIONS
- Network monitoring port: Includes 2 built-in monitoring ports, 1-USB & 1-DB9. Each supports on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature, line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment. Supports individual reboot of selected items connected to load management receptacles and load shedding to increase battery runtime for the most critical loads. Compatible with Tripp Lite's PowerAlert and Watchdog service software.
- WatchDog compatibility: Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications
CERTIFICATIONS
- Certifications: UL1778 (USA), cUL (Canada), Class A (emissions), NOM (Mexico)
|
