This is a brand new product and warranty is provided directly by the manufacturer. Since this is a new item, the UPSforLESS 30-day "lemon" warranty does NOT apply to this item.
System overview
ISOBAR ULTRA premium surge and noise suppression system prevents equipment damage and performance problems resulting from damaging transient surges and line noise. Active filter network maintains noise-free output with zero reaction / response time. Rugged all-metal, mountable housing fitted with high quality duplex style output receptacles. 4 outlets, 2200 joules AC protection level, less than 35V let through voltage, 3 diagnostic LEDs.
Summary
- Input: NEMA 5-15P (Standard 3 prong plug)
- Output: 4 NEMA5-15R (Standard 3-prong receptacles with extra wide transformer-spacing
- 6 ft. AC line cord
- Electrical: 120V AC, 50/60Hz
- Suppression: AC: 140V RMS Clamping / 2200 joules / 85,000 amps
- Construction: Corded all-metal strip with transformer spaced outlets
Detailed Specifications
OUTPUT
- Output volt amp capacity (amps): 12
- Output watt capacity (watts): 1440
- Outlet quantity / type: 4 NEMA 5-15R
- Transformer accomodation: Supports up to 2 large transformer plug accessories without covering remaining outlets
INPUT
- Input connection type: NEMA 5-15P input plug
- Input cord length (ft.): 6 ft.
LEDS ALARMS & SWITCHES
- Diagnostic LEDs: PROTECTION PRESENT (green), LINE FAULT (red) and LINE OK (green)
AC SURGE / NOISE SUPPRESSION
- AC suppression joule rating: 2200 joules
- Clamping voltage (RMS): 140V
- AC suppression response time: NM = 0 ns. CM = <1 ns
- AC suppression surge current rating: 85,000 amps (36,000 NM / 49,000 CM)
- AC suppression components used: Metal oxide varistors, toroidal balanced chokes, ferrite rod-core inductors and VHF capacitors.
- Safe thermal fusing: Prevents unsafe conditions during extreme extended overvoltages and catastrophic occurences
- UL1499 let through rating: 330V - UL Verified
- IEEE587 Cat. A ringwave let through: Less than 35 volts
- EMI / RFI filtering: 40-80 dB
- Isolated filter banks: Unique isolated filter bank design offers additional filtering between each duplex pair of outlets on the strip to prevent electrical noise interference between connected loads. Includes 2 filter banks.
Immunity: Conforms to IEE 587 / ANSI C62.41
PHYSICAL
- Unit Dimensions (HWD/in): 2.5 x 6 x 3.5
- Unit Dimensions (HWD/cm): 6.4 x 15.2 x 8.9
- Material of construction: Metal
- Integrated keyhole mounting tabs: Metal end caps are fitted with keyhole mounting tabs for wallmount installation
CERTIFICATIONS
- UL1449 1998 Rev. (AC Suppression): UL1449
- UL1283 (EMI Filter): UL1283
- UL1363 (Power Tap): UL1363
- cUL / CSA (Canada): cUL
- Approvals: Exceeds IEEE 587 category A&B specifications
WARRANTY
- Product warranty: Lifetime
- Connected equipment insurance (USA and Canada Only): $50,000
|
