Features

• True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
• 6000VA / 4200 watt output power capacity with dual voltage output of 208/120 or 240/120V
• 4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces
• Network interfaces support simultaneous communications via DB9 port, USB port and SNMPWEBCARD slot
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• Includes USB and DB9 serial ports. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
• Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
• Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
• Detachable PDU with built-in manual bypass switch enables hot-swappable UPS replacement without powering off connected equipment
• 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA & Canada only)

• SU6000RT4U UPS System (with SUPDMB56 detachable PDU module)
• USB, DB9 and EPO cabling
• Rackmount installation kit for 4 post rack enclosures
• Owner's manual and warranty information

• Output volt amp capacity (VA): 6000 (240v) / 5400 (208v)
• Output watt capacity (watts): 4200
• Output voltage regulation: Maintains pure sine wave output at all times, regulated within 3% of selected nominal output voltage, less than 5% total harmonic distortion
• Output frequency regulation: Regulates line frequency to 60Hz +/- 0.05Hz
• Outlet quantity / type: 2 NEMA L6-30R, 2 NEMA L6-20R and 8 NEMA 5-15/20R
• Overload protection: Resettable circuit breaker

• Input connection type: NEMA L14-30P split phase, 4 wire
• Recommended electrical service: 30A split phase, 4 wire 208/120 or 240/120V

• Full load runtime: 9 minutes (6000VA) - expandable
• Half load runtime: 24 minutes (3000VA) - expandable
• Expandable battery runtime: Yes, with optional BP192V12-3U
• Typical battery lifespan: 4-6 years (typical)
• Battery recharge rate: 4-6 hours to 90% for internal batteries
• Replacement Battery Cartridge: RBC9-192

• Voltage regulation description: Maintains 208/120 or 240/120V output +/-3%
• Overvoltage correction: Corrects overvoltages as high as 140V (L1-N:L2-N)

• Front panel LEDs: 6 LED DISPLAY: line power, bypass, inverter, charger, output AC and battery operation.
• Alarms: Multi-function audible alarm offers notification of UPS start, backup operation, low battery, overload, UPS fault, inverter fault, DC bus fault, overtemperature, remote shutdown, shutdown imminent and shutdown complete

• AC surge suppression: Conforms to IEEE 587 / ANSI C62.41 specifications
• AC suppression response time: Instantaneous
• EMI / RFI AC noise suppression: Yes

• Shipping weight (lbs): 189.2
• Shipping weight (kg): 85.9
• Unit weight (lbs): 149.6
• Unit weight (kg): 67.9
• Unit Dimensions (HWD/in): 7 x 17.5 x 30.75
• Unit Dimensions (HWD/cm): 17.8 x 44.5 x 78.1
• Form factors supported: Rack (4U)
• Cooling method: Fan
• Battery Access: User replaceable, hot swappable internal batteries and external battery packs

• Operating Temperature: +32 to +104 degrees Fahrenheit, 0 to +40 degrees Celsius
• Operating Elevation (ft): 0-3000m (0 to 10,000 ft.)
• Audible Noise: 60 dBA at front side 1 meter

• Network monitoring port: Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
• Software and cabling included: Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling included.
• SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories

• Transfer time from line power to battery mode: Zero, on-line UPS continuously converts incoming AC to DC, then back to AC. When line power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
• Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 65V (L1-N:L2-N). Below this point, output is maintained utilizing battery reserves.
• High voltage transfer to battery power: Maintains continuous operation during overvoltages to 140V (L1-N:L2-N). Above this point, output is maintained utilizing battery reserves.

• Certifications: Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), Class A (Emissions), NOM (Mexico)

• Product warranty: 2 year product warranty
• Connected equipment insurance (USA and Canada Only): $250,000 connected equipment insurance (USA and Canada only)
• Optional coverage: 3 year, 5 year, next day and on-site warranty coverage available