Features

• Model #: SMART1050XL
• 6 outlets
• Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages
• Larger scale battery produces significantly longer runtimes
• Serial port works with software to facilitate unattended shutdown
• Estimated Retail Pricing: $499.00

Line interactive tower UPS protects internetworking and telecommunications equipment from blackouts, brownouts, overvoltages, surges and line noise. Maintains AC output during blackouts and continuously corrects brownouts and overvoltages from 75 to 147 volts back to normal 120V levels. Supports enhanced monitoring of UPS and line power conditions via USB and DB9 serial ports, included PowerAlert monitoring software and complete cabling. Includes one individually controllable output load bank. SNMP compatible. Runtime is expandable with optional BP36V27 external battery packs.

Unit can be "cold started" to enable temporary AC output during a power failure

• Voltage 120 V AC
• Frequency 60 Hz
• Output volt amp capacity (VA): 1050
• Output watt capacity (watts): 800
• Output voltage regulation
• Waveform Sine wave
• Outlet quantity / type: 6 NEMA 5-15R
  Customized load management receptacles: Individually controllable outlet supports automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. Overload protection: Resettable circuit breaker

• Maximum input amps / watts: 11A / 850 watts
• Input connection type: NEMA 5-15P
• Recommended electrical service: 15A 120V

• Full load runtime: 8 minutes (1050VA), 65 minutes with 1 BP36V27
• Half load runtime: 19 minutes (525VA), 138 minutes with 1 BP36V27
• DC system voltage: 36 V DC
• Battery recharge rate: 2-4 hours to 90%
• Expandable battery runtime: Supports extended runtime with optional BP36V27 external battery pack (multi-pack compatible)

• Voltage regulation description: Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 75V and overvoltages to 147V
• Overvoltage correction: Input voltages between 128 and 147V AC are reduced by 12%
• Direct pass through: Input voltages between 108 and 127V AC are passed on to connected equipment unchanged
• Brownout correction: Input voltages between 93 and 107V AC are boosted by 14%
• Severe brownout correction: Input voltages between 75 and 92V AC are boosted by 30%

• Front panel LEDs: Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information
• Alarms: 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone)
• Switches: Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions. Also includes rear panel CHARGE LEVEL switch.

• AC surge suppression: Conforms to IEEE 587 / ANSI C62.41 specifications
• AC suppression response time: Instantaneous
• EMI / RFI AC noise suppression: Yes

• Shipping weight 43 lbs. (19.5 kg)
• Unit Dimensions (HWD/in): 12.75 x 7.5 x 9
• Unit Dimensions (HWD/cm): 32.4 x 19.1 x 22.9