Features
- Uninterruptible power protection against power failures, power sags, power surges, brownouts, line noise, high voltage spikes, frequency variation, ups, switching transients and harmonic distortion
- True online design - ensures continuous, clean power
- Cell Saver Technology™ charges batteries only when necessary, resulting in up to 50% longer battery life
Technical Specifications
Input Voltage
- 120 VAC Nominal
- Allowable Range 85-144 VAC (full load),
- Input Frequency 45-65 Hz
- Input Power Factor .67 Typical at full load
- Surge Protection Test to IEEE 587 / ANSI C62.41 Cat. A & B Test to IEC 801-4
Output Voltage
- 120 VAC +/- 3% Sine Wave
- Output VA/Watts 1500 / 1050
- Output Current 12.5A
- Output Voltage THD <3%, 100% Non-linear load
- Load Crest Ratio 3:1
- Common Mode Noise Rejection >60 dB
- Transverse Mode Noise Rejection >80 dB
PHYSICAL
- UPS weight with standard battery 14.9 kg / 33 lbs.
- UPS Dimensions 9.9"h x 5.6"w x 15.8"d
BATTERY
- Battery Type Sealed, lead-acid/maintenance free
- Full Load Support Time 6 minutes
- Recharge time 4 hours to 80% capacity
GENERAL
- Architecture True on-line, double-conversion, powerline isolated
- User Interface 5 segment LED display with meters and alarms
- Operation Fully automatic, touch-pad control
- Diagnostics Full system self test on power up
- UPS Bypass Automatic on overload or UPS failure
Output
- (4) 5-15R Receptacles
- Safety UL 1778, CSA-C22.2 No. 107.1, EN50091-1
ENVIRONMENTAL AND SAFETY
- Audible Noise 45 dBA at 1 meter
- Ambient Operating Temperature +10C to +40C
- Ambient Storage Temperature -20C to +60C
- Relative Humidity 5-95%, non-condensing
- EMI Suppression FCC Part 15, Subpart J, Class A, Class B available on selected models EN50081-1 EN50082-1
|
