This true online, double-conversion UPS is suitable for high availability situations and mission critical equirements where a rock steady power supply is essential.

Features

True Online Double-Conversion	Rock-steady power output and zero switchover time in the event of a power outage.
Pure Sine Wave Output	Very clean power to your protected equipment.
LCD Front Panel	Ease of use.
SNMP Capability	Monitor the UPS from anywhere on your network.
Cold Starting	The UPS will start even with no power from the wall outlet.
Advanced Battery Management	The UPS conserves battery life by reducing the number of times the UPS has to rely on the batteries to boost line voltage.
Extended Runtime Capability	Ability to add external battery cabinet to extend the length of time the UPS will provide power to your protected equipment.
Serial Port	Communicate with PC for automated shutdown. UPSMON monitoring software included allows you to perform automatic shutdowns, record power failure history and show basic parameters such as input/output voltage, input/output frequency, battery level and load levels.

Specifications

• 1500VA / 1050 Watts
• Outlets: (5) NEMA 5-15R (standard 3-prong receptacles)
• Simulated sine wave
• Automatic Voltage Regulation (AVR) automatically increases output voltage if voltage drops by 9% or more. AVR automatically decreases output voltage if voltage rises by 9% or more.

• Protection Spike: 320 Joules / 2ms
• Protection Overload: UPS automatically shuts down if overload exceeds 110% of nominal voltage for 60 seconds or exceeds 130% of nominal voltage for 3 seconds.
• Protection Unit Fuse for overload & short circuit protection

• Typical recharge time 4 hours (to 90% of full capacity)
• Typical runtime at full load (1050 Watts): 8 minutes
• Typical runtime at half load (525 Watts): 22 minutes

• Built in serial port to communicate with PC for automated shutdown if required.
• Serial cable included.
• Software included.

• Weight 39.6 lbs (18.1 kg)
• Dimensions: 5.8"w x 8.8"h x 16"d (145x220x400 mm)

• On Battery Backup: Slow beeping
• Battery Low: Rapid beeping
• Overload: Continuous beeping

• Noise <40dBA (1 meter from surface)