This is a refurbished uninterruptible power supply/battery backup unit. It has been installed with brand new, high quality batteries, and has been thoroughly tested and then professionally packed in a brand new box. All products sold by UPSforLESS are fully covered for all parts and labor by our famous one-year 'no hassle' warranty.
The APC BR1000 is a high performance desktop battery backup system which features maximum protection in a versatile design. The fully featured APC Back-UPS RS can be placed on the floor, or on a shelf. Up to six battery backup outlets with automatic voltage regulation (AVR) enable you to work through even the most frequent brownouts and power sags. For printers and other devices that do not store or process information, up to three additional outlets provide surge protection. Both Ethernet 10/100BaseT and telephone dataline surge protection safeguards against surges entering via network connections.
Please note that these units do NOT have the floor stand. These are visible in the above photo as the darker grey color. This UPS may be placed flat on a shelf or on the ground without any problems since it is also designed to be installed in equipment racks and operate in a horizontal position.
Specifications
Output
- Output Power Capacity: 600 Watts / 1000 VA
- Output Voltage 230V
- Output Connections: (2) IEC 320 C13 (Surge Protection), (6) IEC 320 C13 (Battery Backup)
Input
- Input Connections: IEC 320 C14
- Input voltage range for main operations: 175-295V
Battery
- Replacement Battery RBC32
- Recharge Time 15 hours
- Typical Backup Time at Half Load (300 Watts) 16.6 minutes
- Typical Backup Time at Full Load (600 Watts) 5.9 minutes
Surge
- Surge energy rating: 180 Joules
Physical
- Height: 14.60 inches (371 mm)
- Width: 3.40 inches ( 86 mm)
- Depth: 13.10 inches (333 mm)
- Rack Height: 2U
- Net Weight: 22.00 lbs. ( 10.00 kg)