Model SYH6K6RMT-P1

This is a rackmountable APC Symmetra series 2KVA-6KVA Modular UPS. The Symmetra series is designed to be modular so that it can be started at 2KVA and gradually upgraded to a 6KVA unit with the addition of power modules (SYPM2KU) modules and battery modules (SYBT2). This unit has already been configured for the maximum 6KVA capacity of the Symmetra series and already has 3 each of the SYPM2KU and the SYBT2 modules installed. The UPS is also equipped with an AP9606 Web/SNMP communications card and the AP9612T Temperature monitoring card.

Overview

Engineered to deliver the highest level of business continuity possible, Symmetra uses a modular, redundant architecture that can scale power and runtime as demand increases or when higher levels of availability are required. Symmetra’s integrated manageability, and hot-swappable, user replaceable power, battery, and intelligence modules enable easy, fast maintenance and serviceability. Its 2-6kVA N+1 redundant rack-optimized form factor makes Symmetra ideal for protecting critical server racks and network rooms. Typical applications include Web and other key application servers, IP based and traditional PBX voice solutions, and enterprise type network switches. Features & Benefits

• Modular design Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
• Hot-swappable intelligence modules Ensures clean, uninterrupted power to protected equipment during Intelligence Module replacement.
• Hot-swappable power modules Ensures clean, uninterrupted power to protected equipment during Power Module replacement.
• Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.

• Network manageable Monitor and control the UPS and access environmental information remotely via the embedded APC Network Management Card with temperature monitoring.
• InfraStruXure Manager compatible Enables centralized management via the APC InfraStruXure® Manager.

• Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
• Disconnected battery notification Warns when a battery is not available to provide backup power.

• Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Generator compatible Ensures clean, uninterrupted power to the loads in the event of an extended power outage
• Cold-start capable Provides temporary battery power when the utility power is out.
• Resettable circuit breakers Enables quick recovery from UPS overload events.

• Output Power Capacity 4200 Watts / 6000 VA
• Max Configurable Power 4200 Watts / 6000 VA
• Nominal Output Voltage 120V,208V
• Output Voltage Note Configurable for 208 or 240 nominal output voltage
• Efficiency at Full Load 85%
• Output Frequency (sync to mains) 57 - 63 Hz for 60 Hz nominal
• Waveform Type Sine wave
• Output Connections
  • (12) NEMA 5-20R (3-prong 20 Amp receptacles suitable for standard USA/Canadian 3-prong 15A or 20A plugs) +
  • (2) NEMA L6-20R (208V 20Amp Twist Lock receptacles)

• Bypass Internal Bypass (Automatic and Manual)
• Nominal Input Voltage 208V
• Input Frequency 60 Hz +/- 3 Hz
• Input Connections NEMA L6-30P (30A Twist-Lock)
• Cord Length 6 feet ( 1.83 meters)
• Input voltage range for main operations 155 - 276V

• Included Battery Modules 3
• Typical recharge time 3 hour(s)
• Typical Runtime at Half Load 29.8 minutes (2100 Watts)
• Typical Runtime Time at Full Load 12.6 minutes (4200 Watts)

• Interface Port(s) DB-9 RS-232,RJ-45 10 Base-T ethernet for web/ SNMP/ Telnet management
• Available SmartSlot™ Interface Quantity 1
• Pre-Installed SmartSlot™ Cards
  • AP9606 Web/SNMP Card
  • APSYCC Symmetra Communications Card
  • AP9612T Temperature Sensing Environmental Card

• Maximum Height 17.50 inches (445 mm)
• Maximum Width 19.00 inches (483 mm)
• Maximum depth 28.75 inches (730 mm)
• Rack Height 10U
• Net Weight 389.00 lbs. (176.82 kg)
• Shipping Weight 437.00 lbs. (198.64 kg)

• Operating Environment 32 - 104 °F (0 - 40 °C)
• Operating Relative Humidity 0 - 95%
• Operating Elevation 0-10000 feet (0-3000 meters)
• Audible noise at 1 meter from surface of unit 60 dBA
• Online Thermal Dissipation 2,529 BTU/hr